Operation process of gantry machining center

Today, the editor will introduce the operation process of the Longmen machining center. Dabai Precision Machine Tool (Jiangsu Co., Ltd.) is a high-tech enterprise specializing in research and development, design, production, and manufacturing of CNC machine tools and CNC tool machines. The company adheres to the production concept of high-quality and cost-effective, and creates a high-end CNC machine tool brand.

1. Start the machine tool. After the machine tool is powered on and started, check whether the fans in each device operate normally, whether the started motors and pumps operate normally, and whether there is any abnormal sound.

2. After confirming that there are no abnormalities, the operator manually moves each axis at low speed to observe whether the display of the movement direction is normal, whether there is any abnormal sound in the transmission system and each motor, and then returns to the reference point and preheats before processing. If manual measurement of the workpiece is required during the processing, the operator must press the feed lock button to stop the measurement.

3. If the operator needs to perform tool compensation during the operation process, they must be careful and careful not to reverse the direction or input the wrong decimal point. If the operator needs to replace the head compartment during the operation process, they need to pay attention to the cleanliness of the head compartment to avoid machine tool alarms.

4. When loading and unloading workpieces, it is necessary to handle them gently and not strike the machine tool with heavy objects. Rough operation is strictly prohibited. During the operation of the machine tool, it is strictly prohibited for the operator to leave the operating position of the machine tool; If you need to leave, you need to stop the machine. The operator is not allowed to change the machine parameters without authorization, and all filters and filters should be cleaned regularly.

5. During the work process, the operator should pay attention to whether the equipment has abnormal movements or sounds. If there are any abnormalities, the machine should be shut down in a timely manner and maintenance personnel should be contacted for handling.